Sr. Maintenance Journeyman-Electrician

Job Description Job Description MAINTENANCE SENIOR JOURNEYMAN (Electrician) Location: New Castle, DE Hourly Rate: $35.612 ($74,074 annualized) This position is an expert craftsman in the electrical field. Most job responsibilities require previous experience on equipment and similar work procedures. Employees in this classification work from general instructions and will have some responsibility for ordering tasks and determining what procedures to apply. Employees may encounter some new situations requiring new solutions. The employee is responsible for following established safety practices while performing assigned duties to protect self, co- workers and the public from personal injury and to prevent damage to Authority property. This position is a bargaining unit position that is represented by International Union of Operating Engineers, Local 542 ESSENTIAL DUTIES AND RESPONSIBILITIES •Provides expert level maintenance support in electrical field (e.g., HVAC, electrical, information technology, electronics, marine vessels, carpentry, automotive) •Troubleshoots the most complex problems and issues •Provides primary expertise on projects and tasks (such as scope and project budgeting) •Conducts preventative maintenance •Emergency response (24/7) to any Authority location •May be responsible for directing and inspecting work of assigned personnel •Develops and maintains various electrical preventative maintenance programs and protocols related to Authority assets, equipment and facilities •Ability to provide excellent customer service to internal and external customers •Ability to perform other assigned duties as required REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES •Expert level knowledge of electrical field •Full understanding of relevant Authority policies and procedures •Knowledge of all relevant federal, state, local and Authority safety regulations and procedures •Knowledge of state laws pertaining to the operation of motor vehicles on public roadways •Complies with all requirements of Federal Drug & Alcohol Testing Program at all times •Ability to lead work crew, coach employees and provide on-the-job training •In order to be classified at this level, individuals must be recognized as fully competent based on external accreditation and certification in addition to his/her license •Ability to work independently on complex electrical system diagnosis and repair •Knowledge of procurement procedures •Ability to read and interpret construction drawings, wiring diagrams and specifications •Ability to read work orders and translate them to work plans •Must be capable of lifting and carrying up to 50 pounds at least 20 yards •Must be capable of performing around hazardous situations such as moving heavy equipment, in and around equipment, at heights, on steep grades, and on ladders and uneven surfaces •Must be capable of wearing appropriate personal protection equipment such as hard hats, protective shoes and clothing, aprons, gloves, eye wear, hearing protection and respirators •Must be capable of performing repetitive motions such as grasping, reaching, bending, lifting, twisting, pushing, pulling and climbing •Ability to work in a variety of adverse weather conditions including extreme heat or cold and/or emergency conditions •Effective oral and written communication skills (including listening skills) •Strong interpersonal and relational skills with the ability to establish and maintain effective professional relationships with Authority personnel and external to customers, vendors, etc.; provides the highest level of customer service and professionalism to all internal and external customers •Ability to perform other assigned duties as required TYPICAL WORK ENVIRONMENTS •Landscaping and grounds keeping •Roadways, airports, and bridges •Custodial/general building maintenance •Painting/rigging •Vessel maintenance •Piers, docks, and wharfs •Crafts (i.e., carpentry, electric, automotive, HVAC) •Emergency response (i.e., snow removal) •Heavy Equipment REQUIRED EDUCATION AND EXPERIENCE •High school diploma/equivalent or equivalent related years of experience •Seven (7) years of relevant experience in electrical field; ten (10) years preferred •Vocational training preferred including successful completion of a registered apprenticeship program LICENSES, REGISTRATIONS, AND CERTIFICATES •Valid driver’s license •Must obtain a Class B CDL with tanker endorsement within six (6) months •Must possess a journeyperson or master equivalent license in good standing issued by a state, US territory or District of Columbia licensure authority ADDITIONAL REQUIREMENTS •Candidates are subject to a pre-employment physical, drug test and background investigation •The Delaware River and Bay Authority requires all employees to have direct deposit with a financial institution or enroll in the payroll card program to receive their bi-weekly pay •Employees holding a valid CDL must be able to obtain and keep current a Medical Examiner’s Certificate and will be subject to random drug and alcohol testing in accordance with Federal and State regulations •Must be willing and available for duty at such hours, day or night, as may be required in order to maintain continuous operation of this facility If you are interested in applying for this position please complete the on-line application at www.drba.net. In addition to the online application, please attach a current resume. The Delaware River and Bay Authority is and Equal Opportunity Employer Company Description The Delaware River and Bay Authority, a bi-state government agency created by Compact in 1962 operates the Delaware Memorial Bridge—the world’s second longest twin span suspension bridge, the Cape May-Lewes Ferry System, and the Delaware City - Salem Ferry Crossing on the Delaware River, as well as five regional aviation facilities, including the Wilmington-Philadelphia Regional Airport located in New Castle, DE. Since its inception, the DRBA has successfully carried out its primary mission of providing vital transportation links between the states of Delaware and New Jersey. Company Description The Delaware River and Bay Authority, a bi-state government agency created by Compact in 1962 operates the Delaware Memorial Bridge—the world’s second longest twin span suspension bridge, the Cape May-Lewes Ferry System, and the Delaware City - Salem Ferry Crossing on the Delaware River, as well as five regional aviation facilities, including the Wilmington-Philadelphia Regional Airport located in New Castle, DE. Since its inception, the DRBA has successfully carried out its primary mission of providing vital transportation links between the states of Delaware and New Jersey.

Electro-Mechanical Maintenance Technician

Job Description Job Description Greenleaf Corporation is looking for an Electro-Mechanical Maintenance Technician to be responsible for advanced troubleshooting, repair, and preventive maintenance of complex industrial equipment and facility systems including electrical, mechanical, hydraulic, pneumatic, and automated control systems. Ensures maximum equipment reliability, safety, and production uptime for the Saegertown, PA facility. Key Responsibilities Diagnose and repair complex equipment failures across multiple disciplines (electrical, mechanical, hydraulic, pneumatic, and controls) Troubleshoot PLC-controlled systems, drives, sensors, robotics, and HMIs Perform preventive and predictive maintenance to minimize downtime Read and interpret electrical schematics, P&IDs, hydraulic diagrams, and mechanical drawings Install, align, and commission new equipment and system upgrades Maintain and repair motors, gearboxes, pumps, valves, conveyors, furnaces, etc. Troubleshoot hydraulic and pneumatic systems including proportional controls Support automation systems including VFDs, servos, and safety circuits Ensure compliance with safety standards (LOTO, NFPA 70E, OSHA, etc.) Document maintenance activities in CMMS Mentor junior technicians and support continuous improvement initiatives Qualifications Required Associate degree or technical certification in Industrial Maintenance, Mechatronics, Electrical Technology, or related field or equivalent experience 5–10 years industrial maintenance experience Strong troubleshooting skills across electrical and mechanical systems Ability to read schematics and technical documentation Preferred PLC troubleshooting experience (Allen-Bradley, Siemens, etc.) Experience with robotics and automated systems VFD/servo drive knowledge Welding and fabrication capability Predictive maintenance tools (vibration, thermography, etc.) Core Competencies Root cause analysis System-level thinking Safety leadership Independent problem solving Communication with operations and engineering teams Benefits We offer an excellent benefits program to all full-time employees, which includes: Health and Dental Insurance (company pays no out-of-pocket premiums, deductibles are $400 individual/$800 family) 401(k) and ROTH Retirement Plan with a Company Match Employee Profit Sharing Tuition Assistance for Employee Greenleaf Scholarships for Dependents Twelve (12) Paid Holidays Paid Vacations Medical and/or Dependent Care Reimbursement Account (Section 125) Short and Long-term Disability Insurance Life, AD&D, and Dependent Life Insurance AFLAC Supplemental Insurance Policies (Additional Benefits) Employee Purchase Program All of this makes Greenleaf a great place to work Equal Opportunity Employer: Disability/Veteran Application is available at www.greenleafcorporation.com. Please send completed application to Rhonda Boulton, PO Box 1040, Saegertown, PA 16433. Company Description Greenleaf Corporation is 3rd generation family owned business in our 80th year in the cutting tool industry. Greenleaf is a leading supplier specializing in the manufacturing of high-performance tungsten carbide and ceramic grade inserts and innovative tool-holding systems. We strive to be problem solvers for the difficult projects that our customers bring to us and that we see in the manufacturing industry as a whole. That has been our guiding principle since our founding in 1945. From its headquarters in Saegertown, Pennsylvania and a facility in North Carolina, Greenleaf maintains its commitment to pioneering breakthroughs in cutting tool technology and delivering productivity solutions to customers around the world. Company Description Greenleaf Corporation is 3rd generation family owned business in our 80th year in the cutting tool industry. Greenleaf is a leading supplier specializing in the manufacturing of high-performance tungsten carbide and ceramic grade inserts and innovative tool-holding systems. We strive to be problem solvers for the difficult projects that our customers bring to us and that we see in the manufacturing industry as a whole. That has been our guiding principle since our founding in 1945. From its headquarters in Saegertown, Pennsylvania and a facility in North Carolina, Greenleaf maintains its commitment to pioneering breakthroughs in cutting tool technology and delivering productivity solutions to customers around the world.

Scrap Burner/Metal Processor

Job Description Job Description Position requires: High school/GED preferred Valid drivers license preferred Duties as follows: Operate cutting torch to cut pieces of scrap into specified sizing Maintain clean torch cutting tip and replace cutting tip as required; Complete daily paperwork including, but not limited to, a pre-shift safety inspection; Perform dismantling, stacking, and scrap value sorting actions; Perform basic maintenance actions and other general labor duties as required. Ability to run or learn hydraulic shears for non ferrous/ferrous material Bobcat and forklift experience preferred Outdoor work required in all seasons Ability to stand 8 hours Required skills: Full time M-F with Saturday hours Able to stand for 8 hour shift Must be able to work in varying natural elements Able to lift up to 40lbs Results orientated/Strong work ethic Reliability, enthusiasm, teamwork Well-developed interpersonal skills – ability to get along with diverse personalities Job Type: Full time $15.00-$19.00 per hour Paid holidays and vacation pay Company Description We are an industrial scrap metal recycling facility located in Northern Ohio We purchase, process and sell all grades of scrap metal material from all over the state of Ohio and surrounding. We are partnered with vendors from all over the country to help position ourselves with competitive prices to suit our customers demands. Company Description We are an industrial scrap metal recycling facility located in Northern Ohio We purchase, process and sell all grades of scrap metal material from all over the state of Ohio and surrounding. We are partnered with vendors from all over the country to help position ourselves with competitive prices to suit our customers demands.

Auto Mechanic

Job Description Job Description Job Summary We are looking for a talented Auto Mechanic to join our growing company. You will be responsible for inspecting customer vehicles, diagnosing problems with the engine or other systems, perform routine maintenance, and complete necessary repairs. Candidates with more than one year of mechanic experience are preferred, but we are willing to train the right person. We pride ourselves in providing excellent customer service, so you must be friendly and passionate about giving our customers the best repair experience possible. Duties and Responsibilities Examine cars based on customer requests or concerns Perform basic maintenance, including changing motor oil, rotating tires, and checking fluid levels Repair or replace worn parts and systems, such as spark plugs, wheel bearings, brake pads, fuel systems, and sensors Follow checklists to ensure thorough examination of all parts and systems Identify mechanical and electrical problems with both manual and computerized diagnostic equipment Present estimates to customers with an explanation of why repairs are necessary Perform repairs thoroughly and accurately Ensure customer satisfaction at all times Requirements and Qualifications High School diploma or equivalent preferred Completion of a postsecondary program in automotive service technology a plus ASE certification required Experience with electronic systems maintenance and repair Basic computer skills required Strong communication skills Physical strength and stamina, and the ability to lift up to 50 pounds Company Description Family owned and operated business with over 35 years in the auto industry. We value our employees like we do our family! Company Description Family owned and operated business with over 35 years in the auto industry. We value our employees like we do our family!

Residential & Commercial HVAC Installer

Job Description Job Description Residential & Commercial HVAC Installer Location: Phoenix, AZ Compensation: Competitive hourly rate commission on revenue generated Employment Type: Full-time, Non-Exempt (Overtime Eligible) About Air and Water Air and Water is a fast-growing residential and commercial HVAC company in Phoenix, dedicated to delivering exceptional service, technical expertise, and customer-first solutions. We pride ourselves on our reputation for quality, integrity, and results, and we’re looking for an HVAC Installer to join our team and help us continue raising the bar. Position Summary We are seeking a skilled Residential & Commercial HVAC Installer to support the growth and scalability of our installation department. This role is focused on the proper installation, replacement, and commissioning of HVAC systems across residential and light commercial applications. The ideal candidate is detail-oriented, process-driven, and takes pride in delivering high-quality installations that meet company standards and exceed customer expectations. This position requires strong technical execution, the ability to work efficiently in the field, and a commitment to getting the job done right the first time. Key Responsibilities Install residential and commercial HVAC systems, including split systems, package units, mini-splits, and light commercial rooftop units. Remove and replace existing HVAC equipment, including air handlers, condensers, ductwork modifications, and related components. Perform system startups, testing, and commissioning to ensure proper operation and performance. Read and interpret blueprints, job specifications, and scope of work to execute installations accurately. Ensure all installations meet company standards, manufacturer specifications, and local building codes. Maintain a clean and organized job site before, during, and after installation. Communicate effectively with customers during the installation process to ensure a positive experience. Document completed work, materials used, and job details accurately in ServiceTitan. Collaborate with dispatch, warehouse (if applicable), and leadership to ensure jobs are completed on time and within scope. Maintain company vehicle, tools, and equipment in a clean, organized, and job-ready condition. Identify potential issues in the field and escalate appropriately to leadership when needed. Support and mentor junior installers or helpers to improve overall team performance and efficiency. Qualifications - Minimum 5 years of experience in residential and/or commercial HVAC service and installation. - EPA certification required; NATE certification preferred. - Strong troubleshooting and diagnostic skills for both residential and commercial systems. - Ability to work independently with minimal supervision while maintaining high-quality standards. - Excellent customer service and communication skills. - Valid driver’s license with clean driving record. - Ability to lift 50 pounds, work at heights, and operate power/hand tools safely. Compensation & Benefits - Competitive hourly base pay - (based on experience) - Overtime pay for hours worked beyond 40 per week (non-exempt position). - Commission on revenue generated through service work, repairs, and installations. - Paid time off and holidays. - Company vehicle, tools, and uniforms provided. - Opportunities for professional development and certification reimbursement.

Machinist, Senior

Job Description Job Description Position Summary This position will machine parts with CNC machines to the drawings and blueprint specifications to meet customer requirements. Must possess the skills necessary to perform duties. Must also possess the necessary precision equipment/tools to perform the duties of this position. Essential Job Functions Ability to operate machines to tier level Machine parts to required tolerances Inspect parts as necessary to meet quality requirements using devices such as calipers, micrometers, and go/no-go gauges Perform all necessary hand operations such as filing, fitting, and scraping Checks dispatch list for next job Cleans machine table & machine Sweeps floor and mop Record labor for job by keying data into terminal Any additional job tasks assigned by management Education High School or equivalent Machine Trade School Certification or equivalent work experience Applicable math background and skills Blueprint reading and interpretation skills Mandatory Qualification Requirements Must be proficient in skills and knowledge identified in Tier I and II requirements Demonstrated advanced blueprint reading skills. Must be able to interpret any blueprint no matter how complicated. Must be proficient in CNC machines. This includes running any machine assigned, completing set-up on any job assigned using set-up instructions. Can load programs and edit accordingly to match tool placements in the machine. Must have a strong understanding of tool usage and be capable of determining correct tool for any application. Must be able to troubleshoot tooling problems in case of problems with materials or finishes. Must be able to make correct and necessary edits to any program that is being run. Benefits Competitive salary. Comprehensive benefits package, including healthcare, retirement plans, and paid time off. Opportunities for professional development and career growth within the company. Collaborative and supportive work environment that values innovation and initiative. Must be proficient in skills and knowledge identified in Tier I and II Demonstrated advanced blueprint reading skills. Must be able to interpret any blueprint no matter how complicated. Must be proficient in CNC machines. This includes running any machine assigned, completing set-up on any job assigned using set-up instructions. Can load programs and edit accordingly to match tool placements in the machine. Must have a strong understanding of tool usage and be capable of determining correct tool for any application. Must be able to troubleshoot tooling problems in case of problems with materials or finishes. Must be able to make correct and necessary edits to any program that is being run.